GITA MARKETING CO
Our Products
All products are available in custom specifications and configurations.
Minimum order quantities vary by product type.
For pricing, availability and specific requirements:
GITA MARKETING CO
Industrial Hoses
Authorized Polyhose India Pvt Ltd Distributor
Industrial hoses are supplied for a wide range of pressure, temperature and chemical environments. Hose selection is matched to the actual application, not to generic catalogue assumptions.
PVC BRAIDED HOSE
- Sizes: 6.5 mm – 25.4 mm ID (¼" to 1")
-
Pressure: 15–30 bar (size dependent; 30 bar at
¼"–n", reducing to 15 bar at 1") - Temperature: –10°C to +60°C
- Applications: Vacuum infusion, composite manufacturing, moderate pressure air and water
- Supplied in custom lengths
PVC STEEL WIRE REINFORCED HOSE
- Sizes: 12 mm – 51 mm ID (½" to 2")
- Pressure: 4–10 bar (size dependent)
- Vacuum Rating: 850 mbar (full vacuum rated, all sizes)
- Reinforcement: Galvanized steel wire spiral
- Temperature: –20°C to +60°C
- Applications: Heavy-duty suction and discharge, abrasive materials, higher pressure transfer
- Supplied in custom lengths with fittings as required
PTFE (TEFLON) HOSE
- Sizes: 3.2 mm - 28.58 mm ID (1/8" to 1-1/8")
- Temperature: –54°C to +260°C (continuous, all service)
- Working Pressure: 44-225 bar (size dependent; 225 bar at 1/8")
- Standard: SAE J517 100R14 Type A
- Applications: Chemical transfer, pharmaceutical and food-grade uses
- Characteristics: Excellent chemical resistance to acids, bases, solvents and aggressive media
- Options: Stainless steel fittings, sanitary-grade configurations
HYDRAULIC HOSES
- Sizes: 5.1 mm – 101.6 mm ID (3/16" to 4") — R1AT and R2AT full range
- Pressure ratings: 1,000 – 6,000 PSI (custom ratings on request)
- Types: Rubber, thermoplastic, wire-braided, spiral
- Fittings: JIC, BSP, NPT, SAE, and proprietary fittings as required
- Options: Pressure testing and certification
- Temperature: -40 degrees C to +100 degrees C
- Standards: SAE J517 100R1AT / 100R2AT EN 853 1SN / 2SN ISO 1436
THERMOPLASTIC HOSE
- Sizes: 2 mm - 25 mm
- Temperature: –40 °C to +100 °C
- Applications: Mobile hydraulics, compact machinery, high-flex applications
- Advantages: Lighter weight and tighter bend radius than rubber hoses
RUBBER HOSE SOLUTIONS
- Types: General industrial, steam, welding, compressed air
- Sizes: 12.5 mm - 75 mm
- Materials: EPDM or NBR inner tubes according to application
- Steam hose rating: Up to approximately 164 °C for steam service
Spiral, XLPE, and stainless steel corrugated hoses are also available on request. Contact us for specifications.
GITA MARKETING CO
Material Handling & Lifting Equipment
Authorized Star Lifting & Securing Private Limited Distributor
All lifting and lashing products are supplied with EN-compliant ratings and documentation where applicable.
POLYESTER WEB SLINGS
- Capacity range: 1–12 tonne WLL (Star Lifting range: SL-01 to SL-12)
- Standard: EN 1492-1:2000
- Length range: 1 m – 10 m (longer on request)
- Configurations: Flat, endless and multi‑leg (2‑leg, 4‑leg)
- Widths: 25 mm – 300 mm depending on capacity
- Features: Colour-coded per EN standards, clearly marked Working Load Limit (WLL), traceability documentation
- Safety Factor: 7:1 minimum
POLYESTER ROUND SLINGS
- Capacity range: 1,000 kg - 20,000 kg WLL (1 to 20 tonne)
- Length range: 1 m – 10 m (custom options available)
- Configuration: Endless loop
- Features: Soft contact surfaces for delicate loads and colour-coded capacity identification
- Features: Colour-coded per EN standards, clearly marked Working Load Limit (WLL), traceability documentation
- Standard: EN 1492-2:2000
- Safety Factor: 7:1 minimum
RATCHET LASHING SYSTEMS
- Webbing widths: 25 mm · 35 mm · 50 mm · 75 mm
- Breaking Force: 680 kg – 10,000 kg (size dependent)
- Lashing Capacity: Per EN 12195-2 — LC marked on each strap
- Length range: 3 m – 10 m (other lengths on request)
- Types: Two-part (long strap plus short strap with ratchet) and endless
- Ratings: Lashing Capacity (LC), Working Load Limit (WLL), Break Force (BF ≥ 2 × LC), Standard Tension Force (STF)
- Supplied with EN 12195-2 documentation and labels
SHACKLES AND ACCESSORIES
- D‑shackles and bow shackles in multiple capacities
- J‑hooks and other attachment hardware
- All supplied with marked WLL and supporting documentation where required
MULTI‑LEG SLINGS
- 2‑leg and 4‑leg assemblies using chain or webbing/round sling elements
- Available in various capacities and lengths
- Designed for improved load distribution and complex lift configurations
GITA MARKETING CO
Wind Energy Solutions
Specialized Support Since 2007
Wind turbine blade manufacturing and composite processes are supported with components and assemblies designed around vacuum infusion and resin handling requirements.
WHAT WE SUPPLY
- Vacuum infusion hoses – PVC braided and steel wire reinforced
- Resin transfer assemblies – configured for specific mold layouts
- Pre-cut hose kits – length-identified to reduce waste and installation time
- Flow control and valve arrangements – tailored for infusion processes
- Engineering support – for system design, flow rate analysis and resin compatibility
WHY THIS SPECIALIZATION MATTERS
- Understanding of vacuum integrity and non‑kinking hose requirements
- Experience with epoxy and polyester resin compatibility
- Awareness of long project timelines and production schedules
- Ability to adapt assemblies to specific blade mold designs
GITA MARKETING CO
Pneumatic Components
PU TUBING (POLYURETHANE)
- Sizes: 4x2.5 mm to 16x12 mm OD x ID (other sizes on request)
- Temperature: –40 °C to +60 °C
- Properties: Good abrasion resistance and stability in pneumatic applications
- Applications: Automation, machine pneumatics and compressed air
NYLON / PU TUBING
- Designed for higher strength applications
- Available in various diameters for pneumatic and control systems
PU COILED HOSE
- Polyurethane coiled hoses for flexible pneumatic connections
- Available in multiple coil lengths
PVC AIR HOSES AND ACCESSORIES
- PVC air hoses in common sizes (for general compressed air use)
- Quick couplings, push-to-connect fittings and other pneumatic connectors
- PVC ball valves (e.g. 20 mm, 25 mm) and high-pressure ball valves
- Camlock couplings (male/female adaptors, complete sets)
GITA MARKETING CO
Custom Assemblies
Complete Pressure Solutions
Custom hose and piping assemblies are designed, fabricated and tested to match required pressure ratings and operating environments
Hydraulic Assemblies
STEP 1 – SPECIFICATION REVIEW
- Application description
- Pressure, temperature and media
- Required length and routing path
- End fittings (JIC, BSP, NPT, SAE or proprietary)
- Any standards or documentation needed
STEP 2 – ENGINEERING RECOMMENDATION
- Suitable hose construction (braid vs. spiral, rubber vs. thermoplastic)
- Fitting compatibility and sealing type
- Safety factors and pressure rating margins
- Compliance with relevant standards (for example, SAE J517, ISO 1436)
STEP 3 – FABRICATION AND TESTING
- Precision cutting to required lengths
- Crimping or assembling fittings to manufacturer specifications
- Pressure testing when specified
- Visual inspection and documentation preparation
STEP 4 – DELIVERY AND SUPPORT
- Timely delivery based on urgency
- Basic installation guidance on routing and bend radii
- Maintenance and replacement interval guidance
- Specification records kept for future reorders
- Typical pressure range supported: approximately 1,000 – 6,000 PSI.
- Typical temperature range supported: approximately –40 °C to +100 °C (higher with specific constructions).
Flow Control & Piping
RPVC ball valve extension for precise flow control in industrial piping systems. Quarter-turn operation with full-bore flow and bubble-tight shut-off. Designed for corrosive fluid handling, chemical processing and wind-energy manufacturing environments.
Ball Valve Extension
- Sizes: 20 mm, 25 mm, 32 mm, 40 mm, 50 mm
- Body Material: RPVC (Rigid PVC)
- Seat / Seals: PTFE seat, EPDM O-rings
- Handle: Polypropylene lever
- End Connection: True union socket / BSP thread
- Pressure Rating: 16 bar / 235 psi @ 23°C
- Max Temperature 60°C (140°F)
- Vacuum Rated: Yes
- Standard: ASTM F1970
- Applications: Wind energy blade manufacturing, Chemical processing, Water treatment, Industrial fluid control